Battery Rail Kit, 30 in, with Stainless Hardware

Complete battery rail kit. Each rail is 30 inches (76cm) long with 12 beveled holes for tying down batteries and gear in rough conditions. Contains two white oak rails, all stainless mounting hardware, watertight gaskets, and full instructions.

To keep the batteries from shifting in heavy waves, eCanoe has designed these premium-grade Appalachian White Oak Battery Rails. Dip-coated in Thompson's Water Seal® after manufacture for long life. May be painted or left natural. Each rail is 30 inches (76cm) long, 1.0" (2.5cm) wide, and 1.25" (3.2 cm) high with twelve 3/8" (0.95cm) beveled holes spaced 2.5" (6.4cm) apart for attaching ropes and bungie hooks. The included hardware fits through two 5/16" (8mm) mounting holes spaced 18 inches (46cm) apart in each rail. The rail ends are gracefully tapered to prevent toe stubs. These rails are very strong and add extra stiffness to the hull of a canoe or small boat. This Battery Rail Kit contains TWO BR-30 rails complete with specialized 18-8 stainless hardware for mounting to the bottom of the hull. Four 1" (2.5cm) diameter by 2"(5cm) long flathead bolts, washers, nuts, cap-nuts and neoprene gaskets fasten the rails to hulls up to 1/2" (1.25cm) thick. No messy putty, glue, or silicone sealant is needed for a watertight installation. The thin flat-head fasteners are almost flush with the bottom of the boat, reducing drag to a minimum. A handsome and very useful addition for smaller canoes and boats. Complete instructions are included, because if you are going to drill four 1/4-inch holes in the bottom of your boat, you want to do it right! (see full instructions at www.ecanoe.org). Made in USA.