eCanoe Fuse Link Repair Kit, 75 Amps

Repair kit for 75 amp eCanoe fuse links. May also be used to add a fuse link to protect 8 to 12 AWG wires.

Murphy's Law is always in effect, meaning some day you may short an eCanoe jumper or extension cord across a live battery and the internal fuse link will blow - saving your battery, wires, boat, and hands from possible injury. This repair kit saves you money by replacing the blown fuse link. Repair takes some technical skill. An 80-100 Watt soldering iron and heat gun or a small butane torch are required. The kit contains the 75-amp fuse link, crimp/solder connectors suitable for wires from 8 to 12 AWG (for the 14 AWG wires found on small trolling motors, use FLRK-50), adhesive-lined thick-wall heat shrink tubing, and enough lead-free electronic solder to do the job. The kit may also be used to add a fuse link to unfused trolling motor wires near the positive battery connector as recommended by motor manufacturers. For 12 to 48 volt systems. Full instructions included. Made in USA.